How do you reset a Westinghouse dishwasher?

How do you reset a Westinghouse dishwasher?

Simply unplug the dishwasher for a few minutes and then plug it back in.

How do I fix a blocked Westinghouse dishwasher?

If the valve gets stuck closed, it will prevent the water from draining. If the check valve is stuck closed, try cleaning it out and then replace it if necessary. The drain hose might be clogged. To unclog the drain hose, remove the drain hose from both the dishwasher and the sink drain and clean it out.

Why is my Westinghouse dishwasher not working?

Common solutions for: Westinghouse Dishwasher won’t start. If the thermal fuse blows, it will prevent the dishwasher from starting. To determine if the thermal fuse is defective, use a multimeter to test the fuse for continuity. If the thermal fuse does not have continuity, replace it.

How do I turn off the delay on my Westinghouse dishwasher?

To cancel the Delay Start or Delay Hours option: Press the Delay Start pad until the hours of delay indicator goes off. On most models, pressing and holding the Start or Start/Reset pad for 3 seconds will cancel any set cycle, including the Delay Start cycle.

What does H22 mean on Westinghouse dishwasher?

Like. 1 answer. Haroon 4 years ago. Hi H22 means the dishwasher set for a delay start ie it will start after 22 hours.

How do you fix a clogged dishwasher?

First, pour a solution of baking soda and vinegar down the basket at the bottom of your dishwasher. After letting it settle for 10-15 minutes, pour a pot of boiling hot water down the basket and see if that clears the clog.

Where is the thermal fuse on a Westinghouse dishwasher?

Most dishwashers have the thermal fuse located in the control panel area.

Is it possible to repair a Westinghouse dishwasher?

Repairing the dishwasher with your own hands will save your budget from unnecessary costs. The table shows the main problems that can arise during the use of the device and it also lists methods which can be used to fix them.

Where is the error code on a Westinghouse dishwasher?

This is typically located under the kitchen sink. An F1 error code on your Westinghouse dishwasher indicates that a leak is detected somewhere in the unit, whereas an F3 error code pinpoints the issue to a problem with the overflow protector.

Is there a way to delay the start of a dishwasher?

Make Sure the Delay Start is Not On: On models with a Delay Hours button, the delayed start feature may be activated. For more information, view: Dishwasher – Delay Start Option. Some models have a Sleep/Sabbath Mode, which turns off all lights and sounds on the dishwasher.

Where is the overflow Protector on a Westinghouse dishwasher?

An F1 error code on your Westinghouse dishwasher indicates that a leak is detected somewhere in the unit, whereas an F3 error code pinpoints the issue to a problem with the overflow protector. The overflow protector is normally located in the front left corner of the dishwasher tub.