Table of Contents
- 1 What does UE mean on a survey?
- 2 What do surveyors markings mean?
- 3 What do the numbers on a land survey mean?
- 4 How do you read a survey elevation?
- 5 How do you read a lot plan?
- 6 Is it illegal to remove Survey pins?
- 7 How do surveyors measure distance?
- 8 When do you need pegs and lockspits in a rural survey?
- 9 What are the abbreviations used by land surveyors?
What does UE mean on a survey?
UE – Utility Easement. WBL – West Boundary Line or Westbound Lane.
What do surveyors markings mean?
According to the California Land Surveyors Association (CLSA), the markers, or survey monuments, are a means of visualizing the corners of parcels or rights-of-way. Survey markers protect property owners’ rights since they identify original survey points.
What do the numbers on a land survey mean?
Each segment will contain numbers and letters indicating the direction from North that the line proceeds as well as the distance to the next point. For example, a segment may have the notation N 15° 30′ 45″ E on one side of the line and the notation 166.25′ on the other side of the line.
What does PC mean in surveying?
PC Point of Curvature. The point where a curve begins. Pile of Stones A heap of stones used to mark a property corner or sometimes. placed at intervals along property lines.
What does PK nail mean?
Pk-nail meaning (surveying) A thick-shanked nail with an indentation in the middle of its head, driven into the ground to mark a position precisely. noun.
How do you read a survey elevation?
Read the number opposite the pointer. That number is your true elevation. If using an optical instrument, just read the number across the horizontal line. That number is your true elevation.
How do you read a lot plan?
Tips on How to Read a Site Plan
- Find The Title Block. In the bottom right corner of most plans, you’ll find what’s called a title block.
- Learn the Plan’s Scale.
- Determine the Orientation of the Plan.
- Know the Datum Point.
- Note the Site’s Contours.
- Locate Existing Structures.
Is it illegal to remove Survey pins?
One question we get asked frequently is: Is it illegal to move a survey marker? Generally, the answer to that question is YES, it is illegal. Only government officials with a permissible purpose, such as a cadastral land resurvey, should remove or alter permanent survey markers.
What does a surveyor pin look like?
What are property pins, where are they located, and what do they look like? Property pins are thin iron bars, two to three feet long, and sometimes capped with plastic, which the original survey crew inserted on the property lines. Surveyors may also place a metal T-bar post at the property pin location.
How do you read a property description?
The more common method used in land surveys and property descriptions uses quadrants. The quadrants are northeast, southeast, southwest and northwest. For an example of N25°E, face north, then turn 25 degrees to the east and go that direction. If your bearing is S40°W, face south and turn 40 degrees to the west.
How do surveyors measure distance?
To measure distances, land surveyors once used 100-foot long metal tapes that are graduated in hundredths of a foot. To measure the horizontal distance between two points, one surveyor uses an EDM instrument to shoot an energy wave toward a reflector held by the second surveyor.
When do you need pegs and lockspits in a rural survey?
In a rural survey, if a boundary is unfenced, pegs and lockspits must be placed at intervals along the boundary as required by clause 28 (5) Surveying and Spatial Information Regulation 2017.
What are the abbreviations used by land surveyors?
A combination of technical terms, slang, acronyms, abbreviations, and colored flags and tape mark the stakes and rods used by the surveyors. After reading this list, you now understand the most common terms and symbols used by surveyors. Want to learn more about Millman’s services?
Do you know all the abbreviations for a survey?
Not every surveyor will use all the same abbreviations but I hope this guide can help if you are stuck in a similar situation. If this abbreviation chart is helpful to you, go ahead and bookmark it for future reference.
How does a land surveyor Mark the edge of a property?
Using special stakes and markings, the surveyor will mark the limit of disturbance. This is either the edge of the property or a section of the property that cannon be disturbed. The edge of the property, especially the corners, is usually marked using a boundary survey monument or a steel rod.