Menu Close

How do you use a Weber gas grill for the first time?

How do you use a Weber gas grill for the first time?

A: Congratulations on the new grill! Yes we suggest preheating the grill for 20 minutes before the first use. This should burn off any packing material or oil. Then throw your food on the grill and you are good to go.

How do you season a Weber grill for the first time?

Our grates do not require any seasoning or re-seasoning prior to use. The grates have a porcelain enamel coating on them that takes away the need for seasoning. Before using grates for the first time, we just recommend preheating the grill and brushing the grates with a bristle brush and you are good to go.

How do I prepare my new gas grill?

Two Easy Steps to Seasoning Your Grill

  1. Before turning the grill on, coat the surface of the grate with high-heat cooking oil.
  2. Wipe any excess oil off the grate with a paper towel, then turn the grill on high for about 15-20 minutes or until the oil starts to burn or smoke.
  3. Tip: After each use, let grill your grill cool.

What is the best oil to season a grill?

Most grill manufacturers recommend canola or peanut oil because they have a smoke point over 450° F. You can also use vegetable oil, sunflower oil or avocado oil. The high smoke points of these oils ensure that the oil won’t burn; which can ruin the seasoning process as well as the taste of your food.

Should you spray your grill before cooking?

You do not have to spray your grill before cooking, but you should lubricate it before putting food on it. If you do not lubricate your grill before cooking, many foods will stick to the surface. Any cooking oil or spray with a high smoke point will work well.

Do you leave the vents open on a Weber?

Most Weber barbecues have vents on both the lid and the bottom bowl. If you are a beginner, leave both the top and bottom vents fully open. As you become more experienced, try permanently leaving the bottom vent fully open and using the lid vent to control the temperature.

How do you start a small Weber propane grill?

To light a Weber® gas grill, first open the lid so unlit gas fumes don’t collect in the cooking box. Next, slowly open the valve on your propane tank (or natural gas line) all the way and wait a minute for the gas to travel through the gas line. Then turn on the burners, setting them all to high.

Should you burn off your grill?

Burning off residue left on your grill is always a good practice, just turn on all your burners to high for 15 minutes before grilling. When your grill reaches these high temperatures, food debris will turn to ash, and will then be easy to brush off using a stainless steel bristle brush.

How long do you burn off a new gas grill?

20 to 30 minutes
Clean away dust, oil, adhesives, coatings, and other gunk that may have accumulated on your BBQ grill at the factory or the store by burning it for 20 to 30 minutes before the first use.

How do you set up a Weber grill?

Gas Grill Setup. To light a Weber® gas grill, first open the lid so unlit gas fumes don’t collect in the cooking box. Next, slowly open the valve on your propane tank (or natural gas line) all the way and wait a minute for the gas to travel through the gas line.

How do you turn on a gas grill?

Turn on the gas. This is usually done by turning a circular shaped valve on top of the propane tank. Some grills may have a secondary valve on the grill that you need to open for it to receive gas. Open the valve fully, then wait about a minute for the gas to move through the line to the grill.

How do you know if a gas grill is working?

Most modern gas grills do. If it does, press and hold down the igniter button, while slowly turning on the burner control knob closest to it. Look through the cooking grates to see if the burner tube has ignited. You should see a row of small bluish flames. As soon as it’s lit, stop pressing the igniter button.

How do you open a propane tank on a grill?

This is usually done by turning a circular shaped valve on top of the propane tank. Some grills may have a secondary valve on the grill that you need to open for it to receive gas. Open the valve fully, then wait about a minute for the gas to move through the line to the grill. Ignite the grill.