Table of Contents
How high do you mount a handrail?
To meet building code requirements, the stair railing should be mounted so that the top of the handrail height is 34 to 38 in. above the front edge of the stair nosings.
How high must a platform be to require a handrail?
29 CFR 1926.500(d)(1) requires every opensided floor or platform 6 feet or more above the adjacent floor or ground level to be guarded by a standard railing or the equivalent on all open sides, except where there is an entrance to a ramp, stairway, or fixed ladder.
What is code for deck railing height?
Building codes vary, but most require a railing on decks more than 24 inches above the ground. A railing height requirement of 36 inches is common. If you’re using treated wood, make sure to use an end cut sealer on all the cuts to protect the exposed untreated wood.
What is the difference between a guardrail and a handrail?
A handrail is a railing used for support. Staircase between walls with an aluminum handrail. Guardrail. In building terms, a guardrail is a railing used to prevent falling from an elevated surface like a deck or balcony.
Does a guardrail need a handrail?
In building terms, a guardrail is a railing used to prevent falling from an elevated surface like a deck or balcony. When guardrail lines a stairway (or a ramp with a rise of greater than 6 inches), building codes will require a secondary handrail, too.
What is building code for handrails?
On a stair, since handrail must be between 34″ and 38″, the handrail and the top of the guard can be one and the same. In commercial applications, the IBC requires a minimum height of 42″. On stairs, once there is a 30″ drop, a handrail will be required and placed between 34″ and 38″ above the nosing.
How tall does a stair rail have to be to be a handrail?
Section 1910.29 (f) (1) (iii) (A) allows the top rail of a stair rail system to serve as a handrail when the stair rail system is not less than 36 inches (91 cm) and not more than 38 inches (97 cm) in height. The preamble to the final rule states:
How tall does a railing have to be in order to be OSHA compliant?
Per OSHA 1910.28, railings installed 60 days before April 10, 1990, can be grandfathered into OSHA compliance at a minimum of 36 inches in height from the working-walking surface. Anything after that date, 42 inches is the standard height that must be met and support a force of 200 lb at any point in the railing.
How tall should a railing be on an airplane?
Our railing system meets or exceeds all of these OSHA requirements. 1910.23(e)(1) – A standard railing shall consist of top rail, intermediate rail, and posts, and shall have a vertical height of 42 inches nominal from upper surface of top rail to floor, platform, runway, or ramp level. The top rail shall be smooth-surfaced throughout…
How tall does a work surface have to be to have a guardrail?
1. Any working surface 4 feet or higher must be protected with guardrails on all sides at least 42″ tall and have to withstand 200 pounds of force. OSHA 1910.29 (b) (1): The top edge height of top rails, or equivalent guardrail system members, are 42 inches (107 cm), plus or minus 3 inches (8 cm), above the walking-working surface.