# How do you figure out how much carpet you need?

## How do you figure out how much carpet you need?

To calculate the square footage of carpet you’ll need, multiply the length times the width, in feet, of any space where you’ll install flooring. It also helps to sketch out a diagram of your home’s layout. It doesn’t need to look good, but make sure the measurements are accurate.

## How many square yards of carpet do I need?

Here’s a simple formula for calculating your carpeting needs and cost: Multiply the length and width (in feet) of each room to be carpeted. Next you will want to calculate your overage so multiply the total by 1.1 to make sure you don’t run short. Divide the total by 9 to get square yards.

How do you calculate square feet for carpet?

Now, multiply the length of the room by the width of the room to determine the square footage, which of course is expressed in square feet. For example: If the room is 12.583 ft. in length and 9.5 ft. in width, you would multiply the two figures (12.583 x 9.5) to determine the square footage, which equals 119.54 sq ft.

### How much does it cost to carpet a 12×12 room?

The average cost to carpet a 12×12 bedroom is \$250 to \$1,100 total or \$2 to \$8 per square foot to install….Bedroom carpet cost.

Size Average total cost
10×10 \$175 – \$750
10×12 \$200 – \$900
12×12 \$250 – \$1,100
12×15 \$300 – \$1,400

### How much does carpet cost for a 12×12 room?

How do I calculate square yards?

To calculate square yards (SQYDS), multiply the length times the width, in feet and divide by 9. There are 9 square feet in a square yard.

## How much does it cost to carpet three bedrooms?

How much does it cost to carpet 3 bedrooms? The total cost to carpet 3 bedrooms measuring an average 500 square feet runs \$1,750 to \$5,500. Actual estimates vary based on room dimensions.

## Should carpet be lighter or darker than walls?

Your wall color should be two tones lighter than your carpet. If you have dark walls, you can also go a few tones lighter with your carpet. Since it’s much easier to change your wall color than your carpet, choose your carpet color first and then match your wall color.

Is 12 inch by 12 inch a square foot?

You will multiply the 12 foot width by the 12 foot length to find the square footage of your room which is 144 square feet.

### How many feet is a 10×10 room?

100 square feet
A room that is 10×10 is 10 feet by 10 feet in size, or 100 square feet in total.

### How much do carpet cleaners charge per room?

You can expect to pay anywhere from \$25 to \$100 per room for professional carpet cleaning. Carpet cleaning is typically charged at \$0.25 per square foot of carpet.

How to calculate how much carpet you need for a room?

To get an idea of how much carpet you will need, enter the flooring measurements of your rooms into our carpet calculator below. TIP: Carpet is quoted either in square feet or square yards so ensure that you are comparing like for like. NOTE: Quantities provided are estimates only.

## How much waste is in 72 square feet of carpet?

72+16 = 88 total square feet. When you measure for carpet, expect at least 10% waste. If you have a unique layout, up that to 20%. With so few width options, you’ll likely end up with plenty of waste.

## How big is a standard carpet roll in feet?

What is a standard carpet roll width and length? Carpet rolls come in standard widths of 12 and 15 feet. Less commonly, you might find a roll 13.5 feet wide. There are no standard roll lengths, but they’ll have enough to cover almost any home. How much carpet and padding do I need? You’ll need equal amounts of carpet padding and carpet.

How much carpet do you need for 13 stairs?

How much carpeting for 13 stairs? You’ll need between 80 and 110 square feet for 13 stairs. For unique stairwells, you might need more. How do I find indoor/outdoor carpet measurements? Measure indoor/outdoor carpet like you would any other area, taking the width times the length.