Menu Close

What is the range of a metre rule?

What is the range of a metre rule?


Range of length, l Equipment Accuracy
l>100cm Measuring tape ±0.1cm
5cm Metre rule ±0.1cm

Vernier calipers ±0.01cm
l<2cm Micrometer screw gauge ±0.001cm or ±0.01mm

What is the precision of a meter ruler?

We can say that the measuring instrument is readable to ±0.05 cm. The ±0.05 cm means that your measurement may be off by as much as 0.05 cm above or below its true value. This value is called the uncertainty or the precision of the instrument.

How is the accuracy of a measurement determined?

As accuracy is defined as how close the measured value is to the actual value, so accuracy of measurement is determined by percentage error.

What is a meter rule?

A meter rule is a device used to measure the length of objects. A meter rule can measure up to 1mm.

What is the least count of Metre rule?

Least count error A metre ruler may have graduations at 1 mm division scale spacing or interval. A Vernier scale on a caliper may have a least count of 0.1 mm while a micrometer may have a least count of 0.01 mm.

What is the reading of vernier callipers?

Vernier caliper scales; main at top, vernier at bottom. It reads 3.58 ± 0.02 mm by adding 3.00 mm (left red mark) on the fixed main scale to vernier 0.58 mm (right red mark). The main scale reading is that to the left of the zero on the vernier scale.

What is proper degree of precision?

degree of precision The degree of polynomials that a given rule for numerical integration integrates exactly. The same concept can be applied in other areas, such as the solution of ordinary differential equations.

What is difference between accuracy and precision?

Accuracy is the degree of closeness to true value. Precision is the degree to which an instrument or process will repeat the same value. In other words, accuracy is the degree of veracity while precision is the degree of reproducibility.

Can random errors be corrected?

Random errors cannot be eliminated from an experiment, but most systematic errors can be reduced.

What are two ways to improve the accuracy of a measurement?

You can increase your precision in the lab by paying close attention to detail, using equipment properly and increasing your sample size.

What is the difference between a rule and a ruler?

A rule may sometimes be called a ruler, and the terms rule and ruler are often used interchangeably. Generally a rule and a ruler are distinguished as: a rule, usually, measures straight from its edge; a ruler starts its measurement a little way in from the edge.

How is a meter rule used?

Answer: A meter rule is a device which is used to measure length of different objects. A meter rule of length 1m is equal to 100 centimeters (cm). On meter rule each cm is divided further in to 10 divisions which are called millimeters (mm). So, a meter rule can measure up to 1mm as smallest reading.

Is the ruler accurate over the full range of a meter?

I would not expect that the ruler has an accuracy of .5mm over the full range of a meter. While it is possible to read the values with an even higher accuracy, the scale itself might be wrong by 1-2 mm. This is a different sort of error. The OP asked about reading errors.

When to use a meter rule in drawing?

Using a meter rule to draw lines on an object longer than the ruler means that the user will have to reposition the ruler after drawing a one-meter line. The repositioning of the ruler after each drawing will lead to errors where the line is drawn will not be perfectly straight.

What is the uncertainty in a meter rule?

The uncertainty in an analog scale is equal to half the smallest division of the scale. If your meter scale has divisions of 1 mm, then the uncertainty is 0.5 mm. Wow that’s a good ruler? Don’t you think that’s pushing it? You’re supposed to “push it” a bit when you’re reading a scale. That’s what the reading uncertainty is for.

Which is the length of a meter rule?

A meter rule, just like the name suggests, has a length of one meter, which is the same as one hundred centimeters. However, the same length of a meter rule is further divided into small units which are millimeters, where each centimeter is divided into ten millimeters. Therefore, a meter rule can be used to measure the smallest length up